Hendi FriendlyOrientation systems for the blind
and visually impaired

Tactile pad ME-24


Tactile pad warning type ME-24 (connectable version)
…studs in form of pyramides 34×34 mm – with flat top

In accordance with Austrian norm ÖNORM V 2102-1.
Dimensions:  544 x 544 mm
Made of elastomer (belt) and two-component cold plastic (studs).
Colour: Various colour combinations (see below)
Used as surface mounted tactile paving (warning and signal tactile indicators) for outdoor as well as indoor applications. To be placed over the existing paving, which makes the installation simple, quick and cost effective (it eliminates excavation and the footpath can be re-opened within a few hours).
Exterior applications: Suitable for the application on matured bitumen and concrete surfaces. Installation by gluing using two-component cold plastic (methacrylate resin).
Interior applications: Installation over surfaces such as ceramic / clay, marble or granite tiles, etc. Installation using glue that is already pre-applied at the bottom of the product and covered by a plastic protection film.

White warning pad with white studs

White warning pad with black studs

Black warning pad with white studs

Black warning pad with white studs

Black warning pad with black studs

Black warning pad with black studs

Available colour combinations with order numbers:

ME-2401   Warning tactile pad 544×544 mm white/white studs
ME-2402   Warning tactile pad 544×544 mm white/black studs
ME-2409   Warning tactile pad 544×544 mm black/white studs
ME-2410   Warning tactile pad 544×544 mm black/black studs