Hendi FriendlySystèmes d'orientation pour aveugles
et malvoyants

Studs ST-51 shot-blasted


Stainless steel tactile paving studs with shot-blasted surface – type ST-51

Surface mounted warning studs made of stainless steel are produced in two formats:  Ø35 mm or Ø25 mm
They are made in accordance with the international norm ISO 23599/2012 and/or the German norm DIN 32984 in various versions and are suitable (as a tactile orientation system for blind and visually impaired people) for indoor or also for outdoor applications (studs made of stainless steel AISI 316 with pins).
The top surface has shot-blasted finish. There are two material options:
……AISI 304 stainless steel (1.4301) – for indoor use
……AISI 316 stainless steel (1.4401) – for indoor and outdoor use
Shot-blasted tactile studs (tactile truncated domes) are available in 3 versions:
– with pin (for fixation into pre-drilled holes in floors)
– without pin (for fixation using additional glue like MAMUT or similar)
– self-adhesive with high-quality AFT adhesive tape (for indoor use only)

Order numbers of all versions are mentioned below the following photos of stainless steel tactile studs.

 

 

 

 

 

 

 

Available versions with order numbers:

ST-5101      Tactile stud Ø35/25×4 mm (AISI 304) shot-blasted surface MILLED, without pin
ST-5101-P  Tactile stud Ø35/25×4 mm (AISI 304) shot-blasted surface MILLED, with pin
ST-5101-S  Tactile stud Ø35/25×4,5 mm (AISI 304) shot-blasted surface MILLED, self-adhesive (AFT tape)
ST-5102      Tactile stud Ø25/15×4 mm (AISI 304) shot-blasted surface MILLED, without pin
ST-5102-P  Tactile stud Ø25/15×4 mm (AISI 304) shot-blasted surface MILLED, with pin
ST-5102-S  Tactile stud Ø25/15×4,5 mm (AISI 304) shot-blasted surface MILLED, self-adhesive (AFT tape)

ST-5151      Tactile stud Ø35/25×4 mm (AISI 316) shot-blasted surface MILLED, without pin
ST-5151-P  Tactile stud Ø35/25×4 mm (AISI 316) shot-blasted surface MILLED, with pin
ST-5151-S  Tactile stud Ø35/25×4,5 mm (AISI 316) shot-blasted surface MILLED, self-adhesive (AFT tape)
ST-5152      Tactile stud Ø25/15×4 mm (AISI 316) shot-blasted surface MILLED, without pin
ST-5152-P  Tactile stud Ø25/15×4 mm (AISI 316) shot-blasted surface MILLED, with pin
ST-5152-S  Tactile stud Ø25/15×4,5 mm (AISI 316) shot-blasted surface MILLED, self-adhesive (AFT tape)