Hendi FriendlySystèmes d'orientation pour aveugles
et malvoyants

Guiding strips ST-12 anti-slip


Stainless steel guiding strips with anti-slip surface – type ST-12

Surface mounted tactile guiding strips L=280 mm made of stainless steel, in accordance with the international norm ISO 23599/2012 in various versions, suitable (as a tactile orientation system for blind and visually impaired people) for indoor applications.
There is non-abrasive slip-resistant tape applied on the top of the strips + upper anti-slip tape (colour options – black, grey,…).
There are two material options:
……AISI 304 stainless steel (1.4301)
……AISI 316 stainless steel (1.4401)
Guiding strips with anti-slip surface are available in 3 versions:
– with pins (for fixation into pre-drilled holes in floors)
– without pins (for fixation using additional glue like MAMUT or similar)
– self-adhesive with high-quality AFT adhesive tape

Order numbers of all versions are mentioned below the following photos of stainless steel guiding lines.

 

 

 

 

 

 

 

Available versions with order numbers:

ST-1201      Guiding strip 280x35x4,5 mm (AISI 304) with anti-slip tape MILLED, without pins
ST-1201-P  Guiding strip 280x35x4,5 mm (AISI 304) with anti-slip tape MILLED, with pins
ST-1201-S  Guiding strip 280x35x5 mm (AISI 304) with anti-slip tape MILLED, self-adhesive (AFT tape)

ST-1251      Guiding strip 280x35x4,5 mm (AISI 316) with anti-slip tape MILLED, without pins
ST-1251-P  Guiding strip 280x35x4,5 mm (AISI 316) with anti-slip tape MILLED, with pins
ST-1251-S  Guiding strip 280x35x5 mm (AISI 316) with anti-slip tape MILLED, self-adhesive (AFT tape)