Hendi FriendlyOrientierungssysteme für Blinden
und Sehbehinderten

Tactile stud PL-20 with pin


Plastic tactile studs with pins – type PL-20

Surface mounted plastic warning studs Ø35/25×4 mm made in accordance with the international norm ISO 23599/2012 in various versions and colours, suitable (as a tactile orientation system for blind and visually impaired people) for indoor or potentially also for outdoor applications.
Tactile studs (tactile truncated domes) are made of polyurethane/desmopan and are available in 2 versions:
– with pin (for fixation into pre-drilled holes in floors)
– without pin (for fixation using additional glue like MAMUT or similar)
Possible colours:  white, black, yellow, grey, red, silver with marble effect, bronze/brass with marble effect
Order numbers of all versions and colours are mentioned below the following photos of plastic tactile studs.

Tactile studPlastic tactile studTactile studs

 

 

 

 

 

 

 

Possible colour versions with order numbers:

PL-2001      Tactile stud Ø35/25×4 mm without pin – white
PL-2001-P  Tactile stud Ø35/25×4 mm with pin – white
PL-2002      Tactile stud Ø35/25×4 mm without pin – black
PL-2002-P  Tactile stud Ø35/25×4 mm with pin – black
PL-2003      Tactile stud Ø35/25×4 mm without pin – yellow
PL-2003-P  Tactile stud Ø35/25×4 mm with pin – yellow
PL-2004      Tactile stud Ø35/25×4 mm without pin – grey
PL-2004-P  Tactile stud Ø35/25×4 mm with pin – grey
PL-2005      Tactile stud Ø35/25×4 mm without pin – red
PL-2005-P  Tactile stud Ø35/25×4 mm with pin – red
PL-2006      Tactile stud Ø35/25×4 mm without pin – silver with marble effect
PL-2006-P  Tactile stud Ø35/25×4 mm with pin – silver with marble effect
PL-2007      Tactile stud Ø35/25×4 mm without pin – bronze/brass with marble effect
PL-2007-P  Tactile stud Ø35/25×4 mm with pin – bronze/brass with marble effect